Control Panel v1.0---------------------------------------------------------------------copyright 1996 Stand Alone, Inc. & Erik WiessmannNOTE: This software is for Newton 2.0 Newtons ONLY.* What's it do?---------------------------------------------------------------------Control Panel lets you set five features of your Newton according to the time of day and power source:	Alarms - You can set as many alarms as you need, alarms will open any application you want when they go off.	Backlighting - Backlighting will be turned on at night, when you are plugges in, when you are on the road, or always. It is up to you!	Open Applications - Automatically open application depending on the time and worksite.	Sleep Delay - Set the sleep delay to never when plugged during the day, 10 minutes when you are plugged in at night and 5 minutes when you are not plugged in.	Worksites - Depending on the time of day and power source the Newton will automatically choose your worksite!* What's in this archive?---------------------------------------------------------------------	There is one Newton software package and two text files inthis archive. They are:	* Control Panel.txt	document you're now reading. 'Nuff said.	* Control Panel.pkg	software package you'll install on your Newton.	* SAStuff.txt		A list of all Stand Alone products.* Installing Control Panel---------------------------------------------------------------------	First off, you must get the Control Panel software package onto yourNewton. You can do this using the Newton Connection Utility (for Mac orWindows), the Newton Package Downloader, or the Newton BackupUtility. See the documentaion with each of these for moreinformation on installing packages with them.* Using Control Panel---------------------------------------------------------------------Control Panel lets you set five features of your Newton according to the time of day and power source. To set these features you must open Control Panel and set your options from within.	Alarms - To set an alarm tap on the leftmost column in Control Panels main screen. A new screen will open showing you all of the alarms for that application. Tapping on the overview button (the button between the arrows) will toggle to show you all alarms. Tap the 'New' button will open a dialog to set a new alarm. To delete or change an alarm, tap on the item to modify, and edit from the window which opens.	Backlighting - To set your Backlighting you must do 2 things. Set the worsite you wish for the Backlighting Conditions and then either: a) Tap on the time column next to Backlighting to set the times Backlighting should be turned on (see below for a description for using the 'time bar') b) tap on the Sleep column to turn on Backlighting after a certain amount of time that the Newton has been asleep, or c) Check the Reboot box to turn on Backlighting every time the Newton is rebooted.	Open Applications - Opening applications is done the same way as turning on backlighting.	Sleep Delay - To set the sleep delay tap on the 'Sleep' button in the status bar. Set the sleep delay from the window which opens (see below for a description for using the 'time bar'). 	Worksites - To set your Worksites tap on the 'Sites' button in the status bar. Set the Worksites from the window which opens (see below for a description for using the 'time bar'). USING THE TIME BARThe 'time bar' is used throughout Control panel. It consists of a setting label, a long time bar, and an up-down arrow (for scrolling). To use the bar, first tap on the label and choose the option you want. Then tap on the time bar. The bar will be colored in according to your selection from the label above.WARNING!!! -- Do NOT freeze Control Panel. It will not work if you do!* Registering Control Panel---------------------------------------------------------------------	You have a 30 day trial period in which to examine Control Panel, during which it will function fully. Should you wish to register, you'll need to do one of the following:	* Call us and pay using Visa, Mastercard or American Express. We can give you a password right over the phone: instant gratification!  (773) 477-2492.	* Send us a check for $15 to the address below.			* Using CompuServe, GO SWREG #13650.		* Register via our Web page: http://www.standalone.com/Stand Alone is open from 9 AM to 7 PM Monday to Thursday, 9 AM to 6 PM Friday,and 10 AM to 4 PM Saturday.  We are Closed on Sunday. These times are CST and GMT -5.	However you register, PLEASE be sure to include an email address(it's not vital, but it will result in MUCH speedier service) and your name, as entered in the Owner Info section of your Newton. This is used to generate the password we send you to unlock Control Panel, so it has to be exact.	Once you register, you will receive a password from us. To use it,open Control Panel and tap on the 'i' button, and enterthe password. You should get a message confirming the password. * Contacting us---------------------------------------------------------------------	If you have any questions regarding Control Panel, or any other Stand Alone Newton application, please don't hesitate to contact us:	Email:		internet: 	info@standalone.com (<-- preferred)		AOL: 		Std Alone		CompuServe:	76342,3057			Phone:		Voice: 		(773) 477-2492		Fax:		(773) 477-2579			Regular Mail:		Stand Alone		3171 N. Hudson, Suite 1		Chicago, IL, 60657, USA	World Wide Web:		http://www.standalone.comStand Alone is open from 9 AM to 7 PM Monday to Thursday, 9 AM to 6 PM Friday,and 10 AM to 4 PM Saturday.  We are Closed on Sunday. These times are CST and GMT -5.		* Version History---------------------------------------------------------------------1.0	Sept 27, 1996	First public release.